Tuesday, October 20, 2009

OOPS With Dotnet

What are the OOPS concepts?
1) Encapsulation: It is the mechanism that binds together code and data in manipulates, and keeps both safe from outside interference and misuse. In short it isolates a particular code and data from all other codes and data. A well-defined interface controls the access to that particular code and data.
2) Inheritance: It is the process by which one object acquires the properties of another object. This supports the hierarchical classification. Without the use of hierarchies, each object would need to define all its characteristics explicitly. However, by use of inheritance, an object need only define those qualities that make it unique within its class. It can inherit its general attributes from its parent. A new sub-class inherits all of the attributes of all of its ancestors.
3) Polymorphism: It is a feature that allows one interface to be used for general class of actions. The specific action is determined by the exact nature of the situation. In general polymorphism means "one interface, multiple methods", This means that it is possible to design a generic interface to a group of related activities. This helps reduce complexity by allowing the same interface to be used to specify a general class of action. It is the compiler's job to select the specific action (that is, method) as it applies to each situation.

What is the difference between a Struct and a Class?

The struct type is suitable for representing lightweight objects such as Point, Rectangle, and Color. Although it is possible to represent a point as a class, a struct is more efficient in some scenarios. For example, if you declare an array of 1000 Point objects, you will allocate additional memory for referencing each object. In this case, the struct is less expensive.

When you create a struct object using the new operator, it gets created and the appropriate constructor is called. Unlike classes, structs can be instantiated without using the new operator. If you do not use new, the fields will remain unassigned and the object cannot be used until all of the fields are initialized.

It is an error to declare a default (parameterless) constructor for a struct. A default constructor is always provided to initialize the struct members to their default values.

It is an error to initialize an instance field in a struct.

There is no inheritance for structs as there is for classes. A struct cannot inherit from another struct or class, and it cannot be the base of a class. Structs, however, inherit from the base class Object. A struct can implement interfaces, and it does that exactly as classes do.

A struct is a value type, while a class is a reference type.

Value type & reference types difference? Example from .NET. Integer & struct are value types or reference types in .NET?
Most programming languages provide built-in data types, such as integers and floating-point numbers, that are copied when they are passed as arguments (that is, they are passed by value). In the .NET Framework, these are called value types. The runtime supports two kinds of value types:

Built-in value types
The .NET Framework defines built-in value types, such as System.Int32 and System.Boolean, which correspond and are identical to primitive data types used by programming languages.

User-defined value types
Your language will provide ways to define your own value types, which derive from System.ValueType. If you want to define a type representing a value that is small, such as a complex number (using two floating-point numbers), you might choose to define it as a value type because you can pass the value type efficiently by value. If the type you are defining would be more efficiently passed by reference, you should define it as a class instead.

Variables of reference types, referred to as objects, store references to the actual data. This following are the reference types:

class

interface

delegate

This following are the built-in reference types:

object,string

What is Method overloading?
Method overloading occurs when a class contains two methods with the same name, but different signatures.

What is Method Overriding? How to override a function in C#?
Use the override modifier to modify a method, a property, an indexer, or an event. An override method provides a new implementation of a member inherited from a base class. The method overridden by an override declaration is known as the overridden base method. The overridden base method must have the same signature as the override method.
You cannot override a non-virtual or static method. The overridden base method must be virtual, abstract, or override.

Can we call a base class method without creating instance?
Its possible If its a static method.
Its possible by inheriting from that class also.
Its possible from derived classes using base keyword.

You have one base class virtual function how will call that function from derived class?
Ans:

class a
              {
                     public virtual int m()
                     {
                      return 1;
                     }
              }
              class b:a
              {
                     public int j()
                     {
                      return m();
                     }
              }

In which cases you use override and new base?
Use the new modifier to explicitly hide a member inherited from a base class. To hide an inherited member, declare it in the derived class using the same name, and modify it with the new modifier.

C# Language Feautures

What are Sealed Classes in C#?
The sealed modifier is used to prevent derivation from a class. A compile-time error occurs if a sealed class is specified as the base class of another class. (A sealed class cannot also be an abstract class)

In which Scenario you will go for Interface or Abstract Class?
Interfaces, like classes, define a set of properties, methods, and events. But unlike classes, interfaces do not provide implementation. They are implemented by classes, and defined as separate entities from classes. Even though class inheritance allows your classes to inherit implementation from a base class, it also forces you to make most of your design decisions when the class is first published.
Abstract classes are useful when creating components because they allow you specify an invariant level of functionality in some methods, but leave the implementation of other methods until a specific implementation of that class is needed. They also version well, because if additional functionality is needed in derived classes, it can be added to the base class without breaking code.

Interfaces vs. Abstract Classes

Feature

Interface

Abstract class

Multiple inheritance

A class may implement several interfaces.

A class may extend only one abstract class.

Default implementation

An interface cannot provide any code at all, much less default code.

An abstract class can provide complete code, default code, and/or just stubs that have to be overridden.

Constants

Static final constants only, can use them without qualification in classes that implement the interface. On the other paw, these unqualified names pollute the namespace. You can use them and it is not obvious where they are coming from since the qualification is optional.

Both instance and static constants are possible. Both static and instance intialiser code are also possible to compute the constants.

Third party convenience

An interface implementation may be added to any existing third party class.

A third party class must be rewritten to extend only from the abstract class.

is-a vs -able or can-do

Interfaces are often used to describe the peripheral abilities of a class, not its central identity, e.g. an Automobile class might implement the Recyclable interface, which could apply to many otherwise totally unrelated objects.

An abstract class defines the core identity of its descendants. If you defined a Dog abstract class then Damamation descendants are Dogs, they are not merely dogable. Implemented interfaces enumerate the general things a class can do, not the things a class is.

Plug-in

You can write a new replacement module for an interface that contains not one stick of code in common with the existing implementations. When you implement the interface, you start from scratch without any default implementation. You have to obtain your tools from other classes; nothing comes with the interface other than a few constants. This gives you freedom to implement a radically different internal design.

You must use the abstract class as-is for the code base, with all its attendant baggage, good or bad. The abstract class author has imposed structure on you. Depending on the cleverness of the author of the abstract class, this may be good or bad. Another issue that's important is what I call "heterogeneous vs. homogeneous." If implementors/subclasses are homogeneous, tend towards an abstract base class. If they are heterogeneous, use an interface. (Now all I have to do is come up with a good definition of hetero/homogeneous in this context.) If the various objects are all of-a-kind, and share a common state and behavior, then tend towards a common base class. If all they share is a set of method signatures, then tend towards an interface.

Homogeneity

If all the various implementations share is the method signatures, then an interface works best.

If the various implementations are all of a kind and share a common status and behavior, usually an abstract class works best.

Maintenance

If your client code talks only in terms of an interface, you can easily change the concrete implementation behind it, using a factory method.

Just like an interface, if your client code talks only in terms of an abstract class, you can easily change the concrete implementation behind it, using a factory method.

Speed

Slow, requires extra indirection to find the corresponding method in the actual class. Modern JVMs are discovering ways to reduce this speed penalty.

Fast

Terseness

The constant declarations in an interface are all presumed public static final, so you may leave that part out. You can't call any methods to compute the initial values of your constants. You need not declare individual methods of an interface abstract. They are all presumed so.

You can put shared code into an abstract class, where you cannot into an interface. If interfaces want to share code, you will have to write other bubblegum to arrange that. You may use methods to compute the initial values of your constants and variables, both instance and static. You must declare all the individual methods of an abstract class abstract.

Adding functionality

If you add a new method to an interface, you must track down all implementations of that interface in the universe and provide them with a concrete implementation of that method.

If you add a new method to an abstract class, you have the option of providing a default implementation of it. Then all existing code will continue to work without change.

see the code

interface ICommon
              {
                     int getCommon();
              }
              interface ICommonImplements1:ICommon
              {
              }
              interface ICommonImplements2:ICommon
              {
              }
              public class a:ICommonImplements1,ICommonImplements2
              {
              }

How to implement getCommon method in class a? Are you seeing any problem in the implementation?
Ans:

public class a:ICommonImplements1,ICommonImplements2
              {
                 public int getCommon()
                 {
                      return 1;
                 }
              }
interface IWeather
              {
                     void display();
              }
              public class A:IWeather
              {
                     public void display()
                     {
                      MessageBox.Show("A");
                     }
              }
              public class B:A
              {
              }
              public class C:B,IWeather
              {
                     public void display()
                     {
                      MessageBox.Show("C");
                     }
              }

When I instantiate C.display(), will it work?

interface IPrint
              {
                     string Display();
              }
              interface IWrite
              {
                     string Display();
              }
              class PrintDoc:IPrint,IWrite
              {
                     //Here is implementation
              }

how to implement the Display in the class printDoc (How to resolve the naming Conflict) A: no naming conflicts

class PrintDoc:IPrint,IWrite
              {
                 public string Display()
                 {
                      return "s";
                 }
              }
interface IList
              {
                 int Count { get; set; }
              }
              interface ICounter
              {
                 void Count(int i);
              }
              interface IListCounter: IList, ICounter {}
              class C
              {
                 void Test(IListCounter x)
                 {
                    x.Count(1);                  // Error
                    x.Count = 1;               // Error
                    ((IList)x).Count = 1;      // Ok, invokes IList.Count.set
                    ((ICounter)x).Count(1);      // Ok, invokes ICounter.Count
                 }
              }

Write one code example for compile time binding and one for run time binding? What is early/late binding?
An object is early bound when it is assigned to a variable declared to be of a specific object type. Early bound objects allow the compiler to allocate memory and perform other optimizations before an application executes.
' Create a variable to hold a new object.
Dim FS As FileStream
' Assign a new object to the variable.
FS = New FileStream("C:\tmp.txt", FileMode.Open)
By contrast, an object is late bound when it is assigned to a variable declared to be of type Object. Objects of this type can hold references to any object, but lack many of the advantages of early-bound objects.
Dim xlApp As Object
xlApp = CreateObject("Excel.Application")

What are the access-specifiers available in c#?
Private, Protected, Public, Internal, Protected Internal.

Explain about Protected and protected internal, “internal” access-specifier?
protected - Access is limited to the containing class or types derived from the containing class.
internal - Access is limited to the current assembly.
protected internal - Access is limited to the current assembly or types derived from the containing class.

CONSTRUCTORS

Difference between type constructor and instance constructor? What is static constructor, when it will be fired? And what is its use?
(Class constructor method is also known as type constructor or type initializer)
Instance constructor is executed when a new instance of type is created and the class constructor is executed after the type is loaded and before any one of the type members is accessed. (It will get executed only 1st time, when we call any static methods/fields in the same class.) Class constructors are used for static field initialization. Only one class constructor per type is permitted, and it cannot use the vararg (variable argument) calling convention.
A static constructor is used to initialize a class. It is called automatically to initialize the class before the first instance is created or any static members are referenced.

What is Private Constructor? and it’s use? Can you create instance of a class which has Private Constructor?
A: When a class declares only private instance constructors, it is not possible for classes outside the program to derive from the class or to directly create instances of it. (Except Nested classes)
Make a constructor private if:
- You want it to be available only to the class itself. For example, you might have a special constructor used only in the implementation of your class' Clone method.
- You do not want instances of your component to be created. For example, you may have a class containing nothing but Shared utility functions, and no instance data. Creating instances of the class would waste memory.

I have 3 overloaded constructors in my class. In order to avoid making instance of the class do I need to make all constructors to private?
(yes)

Overloaded constructor will call default constructor internally?
(no)

Destructor and finalize
Generally in C++ the destructor is called when objects gets destroyed. And one can explicitly call the destructors in C++. And also the objects are destroyed in reverse order that they are created in. So in C++ you have control over the destructors.
In C# you can never call them, the reason is one cannot destroy an object. So who has the control over the destructor (in C#)? it's the .Net frameworks Garbage Collector (GC). GC destroys the objects only when necessary. Some situations of necessity are memory is exhausted or user explicitly calls System.GC.Collect() method.
Points to remember:
1. Destructors are invoked automatically, and cannot be invoked explicitly.
2. Destructors cannot be overloaded. Thus, a class can have, at most, one destructor.
3. Destructors are not inherited. Thus, a class has no destructors other than the one, which may be declared in it.
4. Destructors cannot be used with structs. They are only used with classes.
5. An instance becomes eligible for destruction when it is no longer possible for any code to use the instance.
6. Execution of the destructor for the instance may occur at any time after the instance becomes eligible for destruction.
7. When an instance is destructed, the destructors in its inheritance chain are called, in order, from most derived to least derived.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cpguide/html/cpconfinalizemethodscdestructors.asp

What is the difference between Finalize and Dispose (Garbage collection)
Class instances often encapsulate control over resources that are not managed by the runtime, such as window handles (HWND), database connections, and so on. Therefore, you should provide both an explicit and an implicit way to free those resources. Provide implicit control by implementing the protected Finalize Method on an object (destructor syntax in C# and the Managed Extensions for C++). The garbage collector calls this method at some point after there are no longer any valid references to the object.
In some cases, you might want to provide programmers using an object with the ability to explicitly release these external resources before the garbage collector frees the object. If an external resource is scarce or expensive, better performance can be achieved if the programmer explicitly releases resources when they are no longer being used. To provide explicit control, implement the Dispose method provided by the IDisposable Interface. The consumer of the object should call this method when it is done using the object. Dispose can be called even if other references to the object are alive.
Note that even when you provide explicit control by way of Dispose, you should provide implicit cleanup using the Finalize method. Finalize provides a backup to prevent resources from permanently leaking if the programmer fails to call Dispose.

What is the use of base keyword? Tell me a practical example for base keyword’s usage?

What are the different .net tools which u used in projects?

What will do to avoid prior case?

Will it go to finally block if there is no exception happened?
Ans: Yes. The finally block is useful for cleaning up any resources allocated in the try block. Control is always passed to the finally block regardless of how the try block exits.

Is goto statement supported in C#? How about Java?
Gotos are supported in C#to the fullest. In Java goto is a reserved keyword that provides absolutely no functionality.

What’s different about switch statements in C#?
No fall-throughs allowed. Unlike the C++ switch statement, C# does not support an explicit fall through from one case label to another. If you want, you can use goto a switch-case, or goto default.
case 1:
cost += 25;
break;
case 2:
cost += 25;
goto case 1;



ADO.NET Questions

Advantage of ADO.Net?

ADO.NET Does Not Depend On Continuously Live Connections

Database Interactions Are Performed Using Data Commands

Data Can Be Cached in Datasets

Datasets Are Independent of Data Sources

Data Is Persisted as XML

Schemas Define Data Structures

How would u connect to database using .NET?
SqlConnection nwindConn = new SqlConnection("Data Source=localhost; Integrated Security=SSPI;" +
"Initial Catalog=northwind");
nwindConn.Open();

What are relation objects in dataset and how & where to use them?
In a DataSet that contains multiple DataTable objects, you can use DataRelation objects to relate one table to another, to navigate through the tables, and to return child or parent rows from a related table. Adding a DataRelation to a DataSet adds, by default, a UniqueConstraint to the parent table and a ForeignKeyConstraint to the child table.
The following code example creates a DataRelation using two DataTable objects in a DataSet. Each DataTable contains a column named CustID, which serves as a link between the two DataTable objects. The example adds a single DataRelation to the Relations collection of the DataSet. The first argument in the example specifies the name of the DataRelation being created. The second argument sets the parent DataColumn and the third argument sets the child DataColumn.
custDS.Relations.Add("CustOrders",
custDS.Tables["Customers"].Columns["CustID"],
custDS.Tables["Orders"].Columns["CustID"]);

OR

private void CreateRelation()
{
// Get the DataColumn objects from two DataTable objects in a DataSet.
DataColumn parentCol;
DataColumn childCol;
// Code to get the DataSet not shown here.
parentCol = DataSet1.Tables["Customers"].Columns["CustID"];
childCol = DataSet1.Tables["Orders"].Columns["CustID"];
// Create DataRelation.
DataRelation relCustOrder;
relCustOrder = new DataRelation("CustomersOrders", parentCol, childCol);
// Add the relation to the DataSet.
DataSet1.Relations.Add(relCustOrder);
}

Difference between OLEDB Provider and SqlClient ?
Ans: SQLClient .NET classes are highly optimized for the .net / sqlserver combination and achieve optimal results. The SqlClient data provider is fast. It's faster than the Oracle provider, and faster than accessing database via the OleDb layer. It's faster because it accesses the native library (which automatically gives you better performance), and it was written with lots of help from the SQL Server team.

What are the different namespaces used in the project to connect the database? What data providers available in .net to connect to database?

System.Data.OleDb – classes that make up the .NET Framework Data Provider for OLE DB-compatible data sources. These classes allow you to connect to an OLE DB data source, execute commands against the source, and read the results.

System.Data.SqlClient – classes that make up the .NET Framework Data Provider for SQL Server, which allows you to connect to SQL Server 7.0, execute commands, and read results. The System.Data.SqlClient namespace is similar to the System.Data.OleDb namespace, but is optimized for access to SQL Server 7.0 and later.

System.Data.Odbc - classes that make up the .NET Framework Data Provider for ODBC. These classes allow you to access ODBC data source in the managed space.

System.Data.OracleClient - classes that make up the .NET Framework Data Provider for Oracle. These classes allow you to access an Oracle data source in the managed space.

Difference between DataReader and DataAdapter / DataSet and DataAdapter?
You can use the ADO.NET DataReader to retrieve a read-only, forward-only stream of data from a database. Using the DataReader can increase application performance and reduce system overhead because only one row at a time is ever in memory.
After creating an instance of the Command object, you create a DataReader by calling Command.ExecuteReader to retrieve rows from a data source, as shown in the following example.
SqlDataReader myReader = myCommand.ExecuteReader();
You use the Read method of the DataReader object to obtain a row from the results of the query.
while (myReader.Read())
Console.WriteLine("\t{0}\t{1}", myReader.GetInt32(0), myReader.GetString(1));
myReader.Close();
The DataSet is a memory-resident representation of data that provides a consistent relational programming model regardless of the data source. It can be used with multiple and differing data sources, used with XML data, or used to manage data local to the application. The DataSet represents a complete set of data including related tables, constraints, and relationships among the tables. The methods and objects in a DataSet are consistent with those in the relational database model. The DataSet can also persist and reload its contents as XML and its schema as XML Schema definition language (XSD) schema.
The DataAdapter serves as a bridge between a DataSet and a data source for retrieving and saving data. The DataAdapter provides this bridge by mapping Fill, which changes the data in the DataSet to match the data in the data source, and Update, which changes the data in the data source to match the data in the DataSet. If you are connecting to a Microsoft SQL Server database, you can increase overall performance by using the SqlDataAdapter along with its associated SqlCommand and SqlConnection. For other OLE DB-supported databases, use the DataAdapter with its associated OleDbCommand and OleDbConnection objects.

Which method do you invoke on the DataAdapter control to load your generated dataset with data?
Fill()

Explain different methods and Properties of DataReader which you have used in your project?
Read
GetString
GetInt32
while (myReader.Read())
Console.WriteLine("\t{0}\t{1}", myReader.GetInt32(0), myReader.GetString(1));
myReader.Close();

What happens when we issue Dataset.ReadXml command?
Reads XML schema and data into the DataSet.

In how many ways we can retrieve table records count? How to find the count of records in a dataset?
foreach(DataTable thisTable in myDataSet.Tables){
// For each row, print the values of each column.
foreach(DataRow myRow in thisTable.Rows){

How to check if a datareader is closed or opened?
IsClosed()

Differences between dataset.clone and dataset.copy?
Clone - Copies the structure of the DataSet, including all DataTable schemas, relations, and constraints. Does not copy any data.
Copy - Copies both the structure and data for this DataSet.

What is method to get XML and schema from Dataset?
ans: getXML () and get Schema ()


ASP.NET Questions

Order of events in an asp.net page? Control Execution Lifecycle?

Phase

What a control needs to do

Method or event to override

Initialize

Initialize settings needed during the lifetime of the incoming Web request.

Init event (OnInit method)

Load view state

At the end of this phase, the ViewState property of a control is automatically populated as described in Maintaining State in a Control. A control can override the default implementation of the LoadViewState method to customize state restoration.

LoadViewState method

Process postback data

Process incoming form data and update properties accordingly.

LoadPostData method (if IPostBackDataHandler is implemented)

Load

Perform actions common to all requests, such as setting up a database query. At this point, server controls in the tree are created and initialized, the state is restored, and form controls reflect client-side data.

Load event

(OnLoad method)

Send postback change notifications

Raise change events in response to state changes between the current and previous postbacks.

RaisePostDataChangedEvent method (if IPostBackDataHandler is implemented)

Handle postback events

Handle the client-side event that caused the postback and raise appropriate events on the server.

RaisePostBackEvent method(if IPostBackEventHandler is implemented)

Prerender

Perform any updates before the output is rendered. Any changes made to the state of the control in the prerender phase can be saved, while changes made in the rendering phase are lost.

PreRender event
(OnPreRender method)

Save state

The ViewState property of a control is automatically persisted to a string object after this stage. This string object is sent to the client and back as a hidden variable. For improving efficiency, a control can override the SaveViewState method to modify the ViewState property.

SaveViewState method

Render

Generate output to be rendered to the client.

Render method

Dispose

Perform any final cleanup before the control is torn down. References to expensive resources such as database connections must be released in this phase.

Dispose method

Unload

Perform any final cleanup before the control is torn down. Control authors generally perform cleanup in Dispose and do not handle this event.

UnLoad event (On UnLoad method)

Note To override an EventName event, override the OnEventName method (and call base. OnEventName).

What are server controls?
ASP.NET server controls are components that run on the server and encapsulate user-interface and other related functionality. They are used in ASP.NET pages and in ASP.NET code-behind classes.

What is the difference between Web User Control and Web Custom Control?
Custom Controls
Web custom controls are compiled components that run on the server and that encapsulate user-interface and other related functionality into reusable packages. They can include all the design-time features of standard ASP.NET server controls, including full support for Visual Studio design features such as the Properties window, the visual designer, and the Toolbox.
There are several ways that you can create Web custom controls:

You can compile a control that combines the functionality of two or more existing controls. For example, if you need a control that encapsulates a button and a text box, you can create it by compiling the existing controls together.

If an existing server control almost meets your requirements but lacks some required features, you can customize the control by deriving from it and overriding its properties, methods, and events.

If none of the existing Web server controls (or their combinations) meet your requirements, you can create a custom control by deriving from one of the base control classes. These classes provide all the basic functionality of Web server controls, so you can focus on programming the features you need.

If none of the existing ASP.NET server controls meet the specific requirements of your applications, you can create either a Web user control or a Web custom control that encapsulates the functionality you need. The main difference between the two controls lies in ease of creation vs. ease of use at design time.
Web user controls
are easy to make, but they can be less convenient to use in advanced scenarios. You develop Web user controls almost exactly the same way that you develop Web Forms pages. Like Web Forms, user controls can be created in the visual designer, they can be written with code separated from the HTML, and they can handle execution events. However, because Web user controls are compiled dynamically at run time they cannot be added to the Toolbox, and they are represented by a simple placeholder glyph when added to a page. This makes Web user controls harder to use if you are accustomed to full Visual Studio .NET design-time support, including the Properties window and Design view previews. Also, the only way to share the user control between applications is to put a separate copy in each application, which takes more maintenance if you make changes to the control.
Web custom controls
are compiled code, which makes them easier to use but more difficult to create; Web custom controls must be authored in code. Once you have created the control, however, you can add it to the Toolbox and display it in a visual designer with full Properties window support and all the other design-time features of ASP.NET server controls. In addition, you can install a single copy of the Web custom control in the global assembly cache and share it between applications, which makes maintenance easier.

Web user controls

Web custom controls

Easier to create

Harder to create

Limited support for consumers who use a visual design tool

Full visual design tool support for consumers

A separate copy of the control is required in each application

Only a single copy of the control is required, in the global assembly cache

Cannot be added to the Toolbox in Visual Studio

Can be added to the Toolbox in Visual Studio

Good for static layout

Good for dynamic layout


(Session/State)

Application and Session Events
The ASP.NET page framework provides ways for you to work with events that can be raised when your application starts or stops or when an individual user's session starts or stops:

Application events are raised for all requests to an application. For example, Application_BeginRequest is raised when any Web Forms page or XML Web service in your application is requested. This event allows you to initialize resources that will be used for each request to the application. A corresponding event, Application_EndRequest, provides you with an opportunity to close or otherwise dispose of resources used for the request.

Session events are similar to application events (there is a Session_OnStart and a Session_OnEnd event), but are raised with each unique session within the application. A session begins when a user requests a page for the first time from your application and ends either when your application explicitly closes the session or when the session times out.

You can create handlers for these types of events in the Global.asax file.

Difference between ASP Session and ASP.NET Session?
asp.net session supports cookie less session & it can span across multiple servers.

What is cookie less session? How it works?
By default, ASP.NET will store the session state in the same process that processes the request, just as ASP does. If cookies are not available, a session can be tracked by adding a session identifier to the URL. This can be enabled by setting the following:

http://samples.gotdotnet.com/quickstart/aspplus/doc/stateoverview.aspx

How you will handle session when deploying application in more than a server? Describe session handling in a webfarm, how does it work and what are the limits?
By default, ASP.NET will store the session state in the same process that processes the request, just as ASP does. Additionally, ASP.NET can store session data in an external process, which can even reside on another machine. To enable this feature:

Start the ASP.NET state service, either using the Services snap-in or by executing "net start aspnet_state" on the command line. The state service will by default listen on port 42424. To change the port, modify the registry key for the service: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\aspnet_state\Parameters\Port

Set the mode attribute of the section to "StateServer".

Configure the stateConnectionString attribute with the values of the machine on which you started aspnet_state.

The following sample assumes that the state service is running on the same machine as the Web server ("localhost") and uses the default port (42424):

Note that if you try the sample above with this setting, you can reset the Web server (enter iisreset on the command line) and the session state value will persist.
**

What method do you use to explicitly kill a users session?
Abandon()

What are the different ways you would consider sending data across pages in ASP (i.e between 1.asp to 2.asp)?
Session
public properties

What is State Management in .Net and how many ways are there to maintain a state in .Net? What is view state?
Web pages are recreated each time the page is posted to the server. In traditional Web programming, this would ordinarily mean that all information associated with the page and the controls on the page would be lost with each round trip.
To overcome this inherent limitation of traditional Web programming, the ASP.NET page framework includes various options to help you preserve changes — that is, for managing state. The page framework includes a facility called view state that automatically preserves property values of the page and all the controls on it between round trips.
However, you will probably also have application-specific values that you want to preserve. To do so, you can use one of the state management options.
Client-Based State Management Options:
View State
Hidden Form Fields
Cookies
Query Strings
Server-Based State Management Options
Application State
Session State
Database Support

What are the disadvantages of view state / what are the benefits?
Automatic view-state management is a feature of server controls that enables them to repopulate their property values on a round trip (without you having to write any code). This feature does impact performance, however, since a server control's view state is passed to and from the server in a hidden form field. You should be aware of when view state helps you and when it hinders your page's performance.

When maintaining session through Sql server, what is the impact of Read and Write operation on Session objects? will performance degrade?
Maintaining state using database technology is a common practice when storing user-specific information where the information store is large. Database storage is particularly useful for maintaining long-term state or state that must be preserved even if the server must be restarted.

Explain the differences between Server-side and Client-side code?
Server side code will process at server side & it will send the result to client. Client side code (javascript) will execute only at client side.



Which ASP.NET configuration options are supported in the ASP.NET implementation on the shared web hosting platform?
A: Many of the ASP.NET configuration options are not configurable at the site, application or subdirectory level on the shared hosting platform. Certain options can affect the security, performance and stability of the server and, therefore cannot be changed. The following settings are the only ones that can be changed in your site’s web.config file (s):
browserCaps
clientTarget
pages
customErrors
globalization
authorization
authentication
webControls
webServices

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cpguide/html/cpconaspnetconfiguration.asp

What is Role-Based security?
A role is a named set of principals that have the same privileges with respect to security (such as a teller or a manager). A principal can be a member of one or more roles. Therefore, applications can use role membership to determine whether a principal is authorized to perform a requested action.
**

What are the different authentication modes in the .NET environment?





Attribute

Option

Description

mode

Controls the default authentication mode for an application.

Windows

Specifies Windows authentication as the default authentication mode. Use this mode when using any form of Microsoft Internet Information Services (IIS) authentication: Basic, Digest, Integrated Windows authentication (NTLM/Kerberos), or certificates.

Forms

Specifies ASP.NET forms-based authentication as the default authentication mode.

Passport

Specifies Microsoft Passport authentication as the default authentication mode.

None

Specifies no authentication. Only anonymous users are expected or applications can handle events to provide their own authentication.

How do you specify whether your data should be passed as Query string and Forms (Mainly about POST and GET)
Through attribute tag of form tag.

What are validator? Name the Validation controls in asp.net? How do u disable them? Will the asp.net validators run in server side or client side? How do you do Client-side validation in .Net? How to disable validator control by client side JavaScript?
A set of server controls included with ASP.NET that test user input in HTML and Web server controls for programmer-defined requirements. Validation controls perform input checking in server code. If the user is working with a browser that supports DHTML, the validation controls can also perform validation ("EnableClientScript" property set to true/false) using client script.
The following validation controls are available in asp.net:
RequiredFieldValidator Control, CompareValidator Control, RangeValidator Control, RegularExpressionValidator Control, CustomValidator Control, ValidationSummary Control.

Which two properties are there on every validation control?
ControlToValidate, ErrorMessage

How do you use css in asp.net?
Within the section of an HTML document that will use these styles, add a link to this external CSS style sheet that
follows this form:

MyStyles,css is the name of your external CSS style sheet.

How do you implement postback with a text box? What is postback and usestate?
Make AutoPostBack property to true

How can you debug an ASP page, without touching the code?

What is SQL injection?
An SQL injection attack "injects" or manipulates SQL code by adding unexpected SQL to a query.
Many web pages take parameters from web user, and make SQL query to the database. Take for instance when a user login, web page that user name and password and make SQL query to the database to check if a user has valid name and password.
Username: ' or 1=1 ---
Password: [Empty]
This would execute the following query against the users table:
select count(*) from users where userName='' or 1=1 --' and userPass=''

Asp.net - How to find last error which occurred?
A: Server.GetLastError();
[C#]
Exception LastError;
String ErrMessage;
LastError = Server.GetLastError();
if (LastError != null)
ErrMessage = LastError.Message;
else
ErrMessage = "No Errors";
Response.Write("Last Error = " + ErrMessage);

What is the Global ASA(X) File?

Any alternative to avoid name collisions other then Namespaces.
A scenario that two namespaces named N1 and N2 are there both having the same class say A. now in another class i ve written
using N1;using N2;
and i am instantiating class A in this class. Then how will u avoid name collisions?
Ans: using alias
Eg: using MyAlias = MyCompany.Proj.Nested;

Where would you use an IHttpModule, and what are the limitations of any approach you might take in implementing one?

Can you edit data in the Repeater control? Which template must you provide, in order to display data in a Repeater control? How can you provide an alternating color scheme in a Repeater control? What property must you set, and what method must you call in your code, in order to bind the data from some data source to the Repeater control?

What is the use of web.config? Difference between machine.config and Web.config?
ASP.NET configuration files are XML-based text files--each named web.config--that can appear in any directory on an ASP.NET
Web application server. Each web.config file applies configuration settings to the directory it is located in and to all
virtual child directories beneath it. Settings in child directories can optionally override or modify settings specified in
parent directories. The root configuration file--WinNT\Microsoft.NET\Framework\\config\machine.config--provides
default configuration settings for the entire machine. ASP.NET configures IIS to prevent direct browser access to web.config
files to ensure that their values cannot become public (attempts to access them will cause ASP.NET to return 403: Access
Forbidden).
At run time ASP.NET uses these web.config configuration files to hierarchically compute a unique collection of settings for
each incoming URL target request (these settings are calculated only once and then cached across subsequent requests; ASP.NET
automatically watches for file changes and will invalidate the cache if any of the configuration files change).
http://samples.gotdotnet.com/quickstart/aspplus/doc/configformat.aspx

What is the use of sessionstate tag in the web.config file?
Configuring session state:
Session state features can be configured via the section in a web.config file. To double the default timeout of 20 minutes, you can add the following to the web.config file of an application:

What are the different modes for the sessionstates in the web.config file?

Off

Indicates that session state is not enabled.

Inproc

Indicates that session state is stored locally.

StateServer

Indicates that session state is stored on a remote server.

SQLServer

Indicates that session state is stored on the SQL Server.

What is smart navigation?
When a page is requested by an Internet Explorer 5 browser, or later, smart navigation enhances the user's experience of the page by performing the following:

eliminating the flash caused by navigation.

persisting the scroll position when moving from page to page.

persisting element focus between navigations.

retaining only the last page state in the browser's history.

Smart navigation is best used with ASP.NET pages that require frequent postbacks but with visual content that does not change dramatically on return. Consider this carefully when deciding whether to set this property to true.
Set the SmartNavigation attribute to true in the @ Page directive in the .aspx file. When the page is requested, the dynamically generated class sets this property.

What base class do all Web Forms inherit from?
System.Web.UI.Page

Is it possible for me to change my aspx file extension to some other name?
Yes.
Open IIS:-efault Website :- Properties
Select HomeDirectory tab
Click on configuration button
Click on add. Enter aspnet_isapi details (C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\aspnet_isapi.dll | GET,HEAD,POST,DEBUG)

Open machine.config(C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\CONFIG) & add new extension under tag